Begin: Thursday, July 13, 2023, at 9:00 am
End: Thursday, July 13, 2023, at 3:00 pm
Building(s) or Area(s) Affected: Millrace Studios 1 & 2, Fine Arts C (Metalsmithing/Jewelry) & Woodshop
Scope: EWEB will be setting a new power pole at the NE corner of the Millrace Studio 2 building.
Services Impacted:
- Power will be off to Millrace 1, Millrace 2, Fine Arts C (Metalsmithing/Jewelry) & Woodshop during the shutdown hours.
- EWEB set-up and tear-down work will occur before and after the shutdown hours.
- Vehicle traffic north of the work area will be maintained but may have the possibility of minor interruptions.
- Please note, Gallery way south of the work area is already shutdown via a separate & earlier notice.
Special Instructions: Please shut down and unplug all multi-function copier devices as well as any printers during scheduled power outages. The software on these machines can be negatively affected due to the power surge when the power is turned back on. A power surge can corrupt the clone files in the machines and change preconfigured settings. For questions, please contact Kati Kronholm at 541-346-5370 or katik@uoregon.edu. For non-copier questions, please reach out to the contact person listed below.
Work Performed By: EWEB
Contact: Denise Stewart, CPFM Owner’s Representative, 541-346-2280 or 541-335-1258
Current construction and impacts information can be found on the UO Maps site.
