Campus Closures, Shutdowns and Detours Menu

Begin:  Monday, March 21^st, 2022

End:      Friday, March 25^th, 2022

Building(s) or Area(s) Impacted:  Onyx Bridge – room 368

Scope:  Facilities Services will be removing a fume hood from room 368 during the week of 3/21/22. Water will be shut off at a localized valve and should not impact other spaces. They will need access to 367 to turn off the valves.

Services Impacted:

• Domestic cold and hot water will be offline during this time in room 368.
• Access will be needed to room 367.

Work Performed By:  UO CPFM Facilities Services

Contact:  Tim Allenbaugh, CPFM Owner’s Representative, 541-346-8214

Begin:  Tuesday, March 15^th, 2022 at 7:00 am

End:      Tuesday, March 15^th, 2022 at 3:30 pm

Building(s) or Area(s) Impacted:  Streisinger, Lewis Integrative Science Building, Lokey Labs (CAMCOR)

Scope:  There will be a rolling shutdown of the HVAC system in Streisinger in order to perform an emergency air filter change.  Because this is a rolling shutdown, we do not know exactly when each area will be impacted.

Services Impacted:  This will also affect the heating and A/C in Streisinger, LISB and CAMCOR, including the animal labs.

Work Performed By:  UO CPFM Facilities Services

Contact:  Jim Cody, CPFM Associate Dir. of Facilities Services, 541-346-2302

Begin:  March 23rd, 2022 at 8:00 AM

End:      March 23rd, 2022 at 2:00 PM

Building(s) or Area(s) Impacted:  Unthank Hall

Scope:  We will have an electrical shutdown at Unthank Hall. The building will be on standby power during the shutdown. Stand-By will power walk-in coolers, walk-in freezers, walk-in beverage coolers, ADA doors, MDF/IDF rooms, FSD’s, fire alarm system, elevator system, and all lighting that is on egress. This shutdown is to test the ATS and install a metering cabinet in the main switchgear.

Services Impacted: All electricity will be down except walk-in coolers, walk-in freezers, walk-in beverage coolers, ADA doors, MDF/IDF rooms, FSD’s, fire alarm system, elevator system, and all lighting that is on egress.

Special Instructions: Please shut down and unplug all multi-function copier devices as well as any printers during scheduled power outages. The software on these machines can be negatively affected due to the power surge when the power is turned back on.  A power surge can corrupt the clone files in the machines and change preconfigured settings.

Work Performed By: Oregon Electric Group

Contact: George Bleekman, CPFM Owner’s Representative, 541-346-2625